Dewalt 734 Planer Not Feeding: Troubleshooting Tips

Check the infeed and outfeed rollers, and adjust them if required to resolve the issue with Dewalt 734 planer not feeding. The Dewalt 734 planer is an essential woodworking tool that can save you a lot of time and effort.

However, if you find that it is not feeding, it can be frustrating. There is no need to worry, as this problem is commonly encountered and has a straightforward solution. In most cases, the issue is with the infeed and outfeed rollers.

These rollers are responsible for feeding the wood into the machine and must be adjusted for optimal performance. In this article, we will discuss how to troubleshoot the Dewalt 734 planer not feeding issue and provide some tips for maintaining your planer to prevent such problems in the future.

Reasons Why Dewalt 734 Planer Won’T Feed

Dewalt 734 Planer Not Feeding: Troubleshooting Tips.

If you’re facing issues with getting your dewalt 734 planer to properly feed the wood through, you’re not the only one. There could be several reasons why the planer won’t feed, which we’ll discuss below.

Dull Blades

The most common reason why your planer won’t feed is because of dull or worn-out blades. Dull blades lead to uneven cuts, causing the planer to struggle with feeding the wood through.

To fix this, you’ll need to replace the blades with sharp ones. Use the instruction manual to understand how to replace the blades properly.

Clogged Rollers

Another possible reason why your planer won’t feed is clogged or dirty rollers. The rollers help push the wood through the planer, and when they’re clogged with sawdust or debris, their efficiency is hindered.

To fix this, clean the rollers thoroughly using a vacuum cleaner and a soft brush. Make sure to take all safety precautions before cleaning.

Damaged Rollers

Damaged rollers can also be the reason why your planer won’t feed the wood through. If the rollers are damaged in any way, they might not be able to grip the wood properly, resulting in feeding issues.

To fix this, you’ll need to replace the rollers. Before purchasing new rollers, make sure to check the model number of your planer to ensure compatibility.

Misaligned Cutters

Misaligned cutters can also cause feeding issues. The cutters, which are responsible for shaping the wood, need to be aligned correctly for the planer to function properly. Misalignment can cause the wood to get stuck and clog the rollers.

To fix this, you’ll need to realign the cutters correctly using the instruction manual. Make sure to follow the instructions closely to avoid further damage.

Damaged Drive Belt

Lastly, a damaged drive belt can also lead to feeding issues. The drive belt is responsible for transferring the power from the motor to the rollers and cutters. If the belt is damaged or worn out, the planer might not be able to feed the wood through.

To fix this, you’ll need to replace the drive belt with a new one. Make sure to check the model number of your planer before purchasing a new belt.

There could be several reasons why your dewalt 734 planer won’t feed the wood through. By following the above tips and troubleshooting methods, you should be able to identify and fix the issue at hand.

Troubleshooting The Feed Problem

If you’re experiencing issues with your dewalt 734 planer not feeding properly, we’ll help you troubleshoot the problem.

Remove The Blades And Inspect For Signs Of Wear And Tear

Blades with chipped edges or excessive wear can affect the planer’s performance. If you notice any issues, it’s time to replace the blades.

Clear Any Sawdust Or Debris From The Rollers

Sawdust and debris in the rollers can cause the feed problem, so it’s essential to clean them thoroughly. Make sure to brush away any dirt or debris that might be clogging the rollers and hindering their function.

Clean And Lubricate The Feed Rollers

Dried-up or dirty feed rollers can result in the planer not feeding properly. It’s time to clean and lubricate them. Use a clean cloth or rag dipped in a degreaser to clean the rollers and get rid of dirt and debris.

A quick spray with wd-40 can lubricate the rollers and ensure smooth functioning.

Inspect The Feed Rollers For Any Damage Like Cracks, Flat Spots, Or Any Signs Of Wear And Tear

Constant use of the planer can cause damage to the feed rollers, making them ineffective for feeding the board through. Carefully inspect them and see if there are any signs of damage like cracks or flat spots. If yes, replace them with new ones for the best performance.

Make Sure The Cutters Are Aligned Properly And Securely Attached

Improper alignment or loose cutters can lead to feed problems. Check to make sure that the cutters are in the correct position and securely attached. If not, it’s time to adjust them to avoid feed issues.

Adjust Them For The Correct Position

Proper alignment is essential for the planer to feed the board through the machine. If the cutters are not in the correct position, make sure to adjust them accordingly.

Inspect The Drive Belt For Any Signs Of Damage, And Replace If Necessary.

A damaged drive belt can cause the planer not feeding properly. Check for any signs of wear and tear, cracks, or other damage to the belt. If damaged, it’s crucial to replace it with a new one to ensure the planer’s proper function.

Remember to maintain your dewalt 734 planer well, and it will work like a charm.

Frequently Asked Questions (FAQs):

How Do I Unclog The Feed Rollers On My Planer?

To unclog the feed rollers, remove any debris or dust from the rollers using a cleaning solution or compressed air.

How Can I Tell If The Blades On My Planer Are Dull?

Dull blades will leave a rough surface on the wood, the planer will make a louder noise, and there may be tear-outs.

Can I Sharpen The Blades On My Dewalt 734 Planer?

Yes, you can sharpen the blades by removing them from the planer and using a blade-honing tool or taking them to a professional for sharpening.

Are There Any Safety Precautions I Should Take Before Troubleshooting My Planer?

It is important to turn off and unplug the planer, wear protective equipment, and refer to the user manual before troubleshooting.


After all the research and testing, it is clear that when a dewalt 734 planer is not feeding, it can lead to frustration and decreased productivity. However, there are a variety of reasons why this could be happening, with several potential solutions.

By ensuring that all components are properly adjusted and clean, and by checking the blades for sharpness, users can significantly improve the feeding performance of their planer. Additionally, utilizing appropriate pressure on the infeed/outfeed tables and adjusting the infeed speed, can further enhance your planer’s feeding function.

By implementing these steps, woodworkers can get back to what they do best with minimal interruption. While it can be challenging to identify and solve issues like this, with some patience and a willingness to troubleshoot, a poorly feeding planer can be quickly remedied.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *