Troubleshoot Your DIY Woes: Milwaukee Skill Saw Not Working

Is Milwaukee skill saw not working? Check the power source and troubleshoot.

Milwaukee skill saws are powerful tools that are commonly used for various DIY projects and industrial applications. However, experiencing problems with a milwaukee skill saw can be frustrating. If your saw is not working, there could be several reasons, such as electrical or mechanical issues, incorrect use of the tool, or a dull or broken blade, among others.

Before taking your saw to a professional, it can be helpful to troubleshoot the problem yourself. In this article, we will discuss some common causes of a milwaukee skill saw not working and how to fix them. By following these simple steps, you can potentially save money and time by avoiding a repair or replacement of your saw.

If you are facing dewalt table saw fence issues, read this blog: Dewalt Table Saw Fence Problems

Diagnosing The Problems of Milwaukee Skill Saw Not Working

Milwaukee skill saws are renowned for their durability and remarkable performance. However, like any other power tool, they can develop faults that require diagnosis. Here are some of the key steps to follow in diagnosing the problem with your milwaukee skill saw:

Checking The Power Source And Cord

The first step in diagnosing your milwaukee skill saw is checking the power source and cord. To do this, follow these steps:

  • Ensure the saw is properly plugged and the outlet is working.
  • Check that the cord is not damaged and the wire connections are tight.
  • Ensure the breaker switch is not tripped.

Examining The Saw Blade

The saw blade could be the source of the problem. Here’s what to check:

  • Ensure the saw blade is attached correctly and tighten any loose screws.
  • Check the blade is sharp, not warped, bent, or damaged.
  • Ensure the blade is the correct type for the saw and application.

Inspecting The Motor And Carbon Brushes

The motor and carbon brushes are the critical components of the milwaukee skill saws. Here’s what to check:

  • Check the motor for any debris, loose parts, or burn-out signs.
  • Inspect the carbon brushes and ensure they make good contact with the commutator.
  • Check for cracked or worn-out brushes that may require replacement.

Troubleshooting The Switch

If all else fails, you can troubleshoot the switch. Here’s what to do:

  • Check the power switch is in the “on” position.
  • Check the trigger switch for any damage or loose connections.
  • Use a multimeter to check the switch for continuity and power output.

Milwaukee skill saws are built to last, with proper maintenance. The above steps will assist you in diagnosing the problem with your saw and recommending a solution. Remember to observe safety protocols when fixing or replacing any component, and always seek professional assistance if unsure.

Milwaukee M18 circular Saw Repair

Fixing The Problems of Milwaukee Skill Saw Not Working

Milwaukee skill saws are popular power tools, utilized by many for various projects and home repairs. However, it can be quite frustrating when your skilled saw suddenly stops working or doesn’t function correctly. In this section, we will discuss some common problems that can arise with your milwaukee skill saw and how to fix them.

Replacing A Faulty Cord

One frequent issue with skill saws is a frayed or broken cord. Here are a few key points to replace a faulty cord:

  • Unplug the saw before replacing the cord.
  • Remove the screws holding the handle together, and separate the two halves.
  • Cut the old wire close to the prongs and use a wire stripper to strip about 1/2 inch of insulation off the cut ends of both wires.
  • Insert the new cord into the handle and attach it to the motor terminals using wire nuts.
  • Reassemble the handle and check the new cord’s function.

Also read this blog: Dewalt 20V Battery Charged but not Working

Changing The Saw Blade

Another common issue is a dull or broken blade. Here are a few key points to change your milwaukee skill saw’s blade:

  • Make sure to unplug the saw before changing the blade.
  • Loosen the blade bolt by turning it counterclockwise with a wrench.
  • Remove the outer and inner flanges and blade.
  • Replace the blade with a new one, making sure the blade teeth are facing forward.
  • Reinstall the inner and outer flanges and tighten the blade bolt clockwise with a wrench.

Cleaning Or Replacing The Motor And Carbon Brushes

Dust and debris can accumulate on the saw’s motor and carbon brushes, leading to malfunctions. Here are a few key points for cleaning or replacing the motor and carbon brushes:

  • Remove the carbon brushes and check for wear and tear; if they’re worn out, replace them.
  • Clean the motor’s air vents using a compressed air can or a small brush.
  • Reinstall the carbon brushes and ensure they are making proper contact with the armature.

Repairing Or Replacing The Switch

If your milwaukee skill saw does not turn on, the switch may be faulty. Here are a few key points for repairing or replacing the switch:

  • Unplug the saw and remove the handle halves to access the switch.
  • Use a multimeter to test the switch’s continuity; if it’s faulty, replace it.
  • Install the new switch, making sure all wires are connected correctly.
  • Reassemble the handle and check the switch’s function.

These tips should help you fix the most common issues with your milwaukee skill saw. Regular maintenance and attention to these small details can prolong the lifespan of your power tools and keep your projects running smoothly.

Preventative Maintenance

A milwaukee skill saw is an essential tool for any woodworker or DIY enthusiast, but when it stops working, it can be a frustrating experience. Often, a malfunctioning skill saw can be avoided through proper preventative maintenance. We’ll discuss tips for maintaining your milwaukee skill saw, recommended cleaning and lubrication practices, and how often to conduct routine maintenance.

Tips For Maintaining Your Milwaukee Skill Saw

Regular maintenance can extend the life of your milwaukee skill saw and ensure optimal performance. Here are some tips for maintaining your skill saw:

  • Store your saw properly: Always store your saw in a dry place, and keep it covered when not in use to prevent dust and moisture from accumulating on the moving parts.
  • Check for loose parts: Before each use, take a few minutes to inspect your saw thoroughly. Check for loose bolts, screws, and other parts that could affect the stability and performance of your saw. Tighten them if necessary.
  • Keep the blade sharp: A sharp blade will make cutting much easier, cleaner, and faster. Check the blade for dullness or chipped teeth. If necessary, sharpen or replace the blade.
  • Replace worn parts: Over time, some parts of the saw will wear out, such as the blade guard, motor brushes, or drive belt. Regular inspection can help to identify worn parts, and replacing them promptly can prevent bigger problems from developing.

Recommended Cleaning And Lubrication Practices

Dirt and debris can build up on your saw, affecting its overall performance. Regular cleaning and lubricating can help to maintain its performance. Here are some recommended cleaning and lubrication practices:

  • Wipe the saw blade clean: After each use, wipe the blade clean with a dry cloth to remove sawdust and debris. This will prevent the blade from getting clogged and overheating.
  • Lubricate the moving parts: Regularly lubricate the moving parts of the saw, such as the blade bearings, motor, and gears. Use a suitable oil or lubricant that’s recommended by the manufacturer.
  • Clean the air vents: The air vents and filters can become clogged with sawdust, reducing air circulation and the efficiency of the saw. Clean the air vents and filters regularly to maintain optimal performance.

How Often To Conduct Routine Maintenance?

Routine maintenance is essential for your milwaukee skill saw to work efficiently and last longer. Here’s a recommended maintenance schedule:

  • Daily: Clean the saw blade, check for loose parts, and inspect for visible damage.
  • Monthly: Lubricate the moving parts of the saw and clean the air vents and filters.
  • Yearly: Replace the worn parts of the saw, such as the blade guard, motor brushes, or drive belt.

Following these preventative maintenance tips can help to keep your milwaukee skill saw working efficiently and effectively for years to come. By taking a few minutes to care for your saw carefully, you can avoid expensive repairs and replacements.

Seeking Professional Help

If you’re an avid DIYer or a professional woodworker, you must be well aware of the importance of a skill saw. Milwaukee is a highly-rated brand in the power tool industry, but what happens when your milwaukee skill saw stops working?

In such situations, it’s best to seek professional help to avoid causing any further damage. In this section, we’ll discuss the key points to consider when seeking professional assistance.

When To Consider Seeking Professional Assistance?

If you’re facing any of the following issues with your milwaukee skill saw, it’s recommended that you seek professional assistance:

  • The saw blade is not spinning or it’s spinning too slowly.
  • The saw is overheating or making unusual noises.
  • The saw is vibrating excessively.
  • The saw’s performance is visibly deteriorating.

How To Find A Reputable Repair Service?

Before getting your milwaukee skill saw repaired, it’s crucial to find a reputable repair service. Here are some key points to consider when searching for a repair service:

  • Look for repair services that specialize in the repair of power tools.
  • Check if the repair service has experience repairing milwaukee tools.
  • Look for reviews from past customers to see their experience with the repair service.
  • Consider the repair service’s availability and turnaround time.

What To Expect From A Repair Service?

When you take your milwaukee skill saw for repair, here’s what you can expect:

  • The repair service will diagnose the issue with your saw and provide a solution.
  • The repair service will provide you with an estimate of the repair cost.
  • You can expect the repair service to use high-quality replacement parts to ensure a long-lasting repair.
  • The repair service will test the saw to ensure it’s working correctly before returning it to you.

Seeking professional help for your milwaukee skill saw can save you from causing further damage. When searching for a repair service, consider their specialization, experience, and availability. You can expect the repair service to diagnose the issue, provide an estimate, use high-quality parts, and thoroughly test the saw before returning it to you.

Milwaukee fuel circular saw trigger problems

Frequently Asked Questions(FAQs):

How Do I Troubleshoot My Milwaukee Skill Saw?

To troubleshoot your milwaukee skill saw, examine the cord and the brushes, replace them if necessary, and check the saw blade.

How Do I Replace The Blade On My Milwaukee Skill Saw?

To replace the blade on your milwaukee skill saw, unplug the saw, push the blade-lock button, and loosen the arbor bolt.

How Do I Maintain My Milwaukee Skill Saw?

To maintain your milwaukee skill saw, regularly check the brushes, replace them if necessary, and remove any debris from the saw base.

How Often Should I Replace The Brushes On My Milwaukee Skill Saw?

You should replace the brushes on your milwaukee skill saw every 50 to 60 hours of use or once they have been worn down to half their length.

How Can I Prevent My Milwaukee Skill Saw From Overheating?

To prevent your milwaukee skill saw from overheating, avoid using it continuously for extended periods, and allow it to cool down between cuts.


After going through this informative post, you now know the common issues faced by a milwaukee skill saw. You have learned that a faulty cord, switch, or motor is a common culprit of saw failures. It is important to note that safety measures and proper handling can also contribute to the life of your tool.

By keeping these tips in mind, you can troubleshoot and fix common issues with your milwaukee skill saw. However, if you have exhausted all troubleshooting options, it is best to consult a professional for assistance. Proper maintenance will ensure longevity and efficiency in your tools.

Don’t let a malfunctioning saw hinder your productivity on the job. Take care of your milwaukee skill saw and it will take care of you.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *